<>system-view
[]interface Ethernet 0/0
# enable L3
function on interface (default: bridge mode)
[ ]port link-mode route
[ ]ip address 192.168.13.1
255.255.255.252
[ ]quit
# configure
telnet login with password
[]user-interface vty 0 4
[ ]authentication-mode password
# here we use
“huawei” as a password
[ ]set authentication password simple
huawei
[ ]user privilege level 3
[ ]quit
[]telnet server enable
# configure
telnet login with username and password
[]user-interface vty 0 4
[ ]authentication-mode scheme
# here we user
“user1” as username and “test” as password
[ ]local-user user1
[ ]password cipher test
[ ]service-type telnet
[ ]level 3
[ ]quit
Let's do a test
[]telnet 192.168.13.1
Command view & User view
visit → monitoring → administration
→ manage
user view → system view → interface
view
Configure FTP/TFTP
[]ftp server enable
[]local-user user2
[ ]password simple huawei
[ ]service-type ftp-directory
flash:/ftp/user2
atau
[]ftp server enable
[]aaa
[ ]local-user user2 service type ftp
[ ]local-user user2 password simple
huawei
[ ]local-user user2 ftp-dir
flash:/ftp/user2
